Closure Systems International
Job DetailsJob Location:
Kilgore Plant - Kilgore, TXSalary Range:
UndisclosedDescriptionDUTIES AND RESPONSIBILITIES The incumbents main responsibility will be to operate tool room machinery to construct from prints and sketches parts for molds, dies and machinery at a productive pace.
Additional primary responsibilities will include following proper operating procedures to operate and make setups in the lathe, mill, grinder, EDM, pantograph and verifies conformance of machined parts to specifications.
The incumbent will be responsible for studying specifications, such as prints, sketches or verbal descriptions and visualizes product to determine machines to be used to fabricate parts.
The incumbent will be responsible for verifying dimensions, fits, clearances and finishes, using measuring instruments, and will document these measurements throughout the machining process.
The incumbent will be responsible for assembling mold and die components.
Will also be analyzing molds and dies for wear or damage, and will apply skills and knowledge to make the proper repairs.
The incumbent may be needed to connect wiring and hydraulic lines to install electrical and hydraulic components.
The incumbent is responsible for understanding and following all EHS procedures.
Must be aware of all hazardous materials used in your area, and preventing unnecessary generation of waste materials.
Will be responsible for being aware of and to understand what to do in case of an emergency involving hazardous materials and chemicals.
This position will be responsible for reporting all accidents or injuries as well as spills or other environmental incidents, and for working in a manner that prevents EHS incidents.
The incumbent helps provide a safe work place by assisting in developing, promoting and following practices which prevent injury and meet legal safety requirements.
Follow all food safety guidelines while on the manufacturing floor.
Report any deviation from food safety protocol to the functional responsible personnel.
QualificationsEDUCATIONAL AND OTHER SKILL REQUIREMENTS High school diploma or equivalent GED and technical training in metal working and shop safetyKnowledge of trigonometry and geometry preferred but not requiredMust have great analytical and problem solving skills Must be able to use measuring instruments such as dial indicators, micrometers, calipers, height gage and optical comparatorMust have good organization skills and detail orientationMust have good communication and motivational skillsPHYSICAL DEMANDS Must be able to stand, bend, walk, twist, squat, kneel, push, pull, crawl, balance, job requires full range of body mechanics.
Lifting and carrying of 75lbs.
Whether use of ladders, stairs, climbing, working on platforms is required.
Ability to use and work near power tools, manufacturing equipment, utilize appropriate personal protective equipment (PPE).
Address need for fine manipulation.
Regular and reliable attendance and punctuality.
Ability to engage in shift work.
Frequent requirements of eye-hand coordination, high degree of dexterity regularly involved.
Detailed work which requires close visual attention.
Responsibilities:
DUTIES AND RESPONSIBILITIES The incumbents main responsibility will be to operate tool room machinery to construct from prints and sketches parts for molds, dies and machinery at a productive pace.
Additional primary responsibilities will include following proper operating procedures to operate and make setups in the lathe, mill, grinder, EDM, pantograph and verifies conformance of machined parts to specifications.
The incumbent will be responsible for studying specifications, such as prints, sketches or verbal descriptions and visualizes product to determine machines to be used to fabricate parts.
The incumbent will be responsible for verifying dimensions, fits, clearances and finishes, using measuring instruments, and will document these measurements throughout the machining process.
The incumbent will be responsible for assembling mold and die components.
Will also be analyzing molds and dies for wear or damage, and will apply skills and knowledge to make the proper repairs.
The incumbent may be needed to connect wiring and hydraulic lines to install electrical and hydraulic components.
The incumbent is responsible for understanding and following all EHS procedures.
Must be aware of all hazardous materials used in your area, and preventing unnecessary generation of waste materials.
Will be responsible for being aware of and to understand what to do in case of an emergency involving hazardous materials and chemicals.
This position will be responsible for reporting all accidents or injuries as well as spills or other environmental incidents, and for working in a manner that prevents EHS incidents.
The incumbent helps provide a safe work place by assisting in developing, promoting and following practices which prevent injury and meet legal safety requirements.
Follow all food safety guidelines while on the manufacturing floor.
Report any deviation from food safety protocol to the functional responsible personnel.
Qualifications:
EDUCATIONAL AND OTHER SKILL REQUIREMENTS High school diploma or equivalent GED and technical training in metal working and shop safetyKnowledge of trigonometry and geometry preferred but not requiredMust have great analytical and problem solving skills Must be able to use measuring instruments such as dial indicators, micrometers, calipers, height gage and optical comparatorMust have good organization skills and detail orientationMust have good communication and motivational skillsPHYSICAL DEMANDS Must be able to stand, bend, walk, twist, squat, kneel, push, pull, crawl, balance, job requires full range of body mechanics.
Lifting and carrying of 75lbs.
Whether use of ladders, stairs, climbing, working on platforms is required.
Ability to use and work near power tools, manufacturing equipment, utilize appropriate personal protective equipment (PPE).
Address need for fine manipulation.
Regular and reliable attendance and punctuality.
Ability to engage in shift work.
Frequent requirements of eye-hand coordination, high degree of dexterity regularly involved.
Detailed work which requires close visual attention.
About the Company:
Closure Systems International.
Estimated Salary: $20 to $28 per hour based on qualifications.
Kilgore Plant - Kilgore, TXSalary Range:
UndisclosedDescriptionDUTIES AND RESPONSIBILITIES The incumbents main responsibility will be to operate tool room machinery to construct from prints and sketches parts for molds, dies and machinery at a productive pace.
Additional primary responsibilities will include following proper operating procedures to operate and make setups in the lathe, mill, grinder, EDM, pantograph and verifies conformance of machined parts to specifications.
The incumbent will be responsible for studying specifications, such as prints, sketches or verbal descriptions and visualizes product to determine machines to be used to fabricate parts.
The incumbent will be responsible for verifying dimensions, fits, clearances and finishes, using measuring instruments, and will document these measurements throughout the machining process.
The incumbent will be responsible for assembling mold and die components.
Will also be analyzing molds and dies for wear or damage, and will apply skills and knowledge to make the proper repairs.
The incumbent may be needed to connect wiring and hydraulic lines to install electrical and hydraulic components.
The incumbent is responsible for understanding and following all EHS procedures.
Must be aware of all hazardous materials used in your area, and preventing unnecessary generation of waste materials.
Will be responsible for being aware of and to understand what to do in case of an emergency involving hazardous materials and chemicals.
This position will be responsible for reporting all accidents or injuries as well as spills or other environmental incidents, and for working in a manner that prevents EHS incidents.
The incumbent helps provide a safe work place by assisting in developing, promoting and following practices which prevent injury and meet legal safety requirements.
Follow all food safety guidelines while on the manufacturing floor.
Report any deviation from food safety protocol to the functional responsible personnel.
QualificationsEDUCATIONAL AND OTHER SKILL REQUIREMENTS High school diploma or equivalent GED and technical training in metal working and shop safetyKnowledge of trigonometry and geometry preferred but not requiredMust have great analytical and problem solving skills Must be able to use measuring instruments such as dial indicators, micrometers, calipers, height gage and optical comparatorMust have good organization skills and detail orientationMust have good communication and motivational skillsPHYSICAL DEMANDS Must be able to stand, bend, walk, twist, squat, kneel, push, pull, crawl, balance, job requires full range of body mechanics.
Lifting and carrying of 75lbs.
Whether use of ladders, stairs, climbing, working on platforms is required.
Ability to use and work near power tools, manufacturing equipment, utilize appropriate personal protective equipment (PPE).
Address need for fine manipulation.
Regular and reliable attendance and punctuality.
Ability to engage in shift work.
Frequent requirements of eye-hand coordination, high degree of dexterity regularly involved.
Detailed work which requires close visual attention.
Responsibilities:
DUTIES AND RESPONSIBILITIES The incumbents main responsibility will be to operate tool room machinery to construct from prints and sketches parts for molds, dies and machinery at a productive pace.
Additional primary responsibilities will include following proper operating procedures to operate and make setups in the lathe, mill, grinder, EDM, pantograph and verifies conformance of machined parts to specifications.
The incumbent will be responsible for studying specifications, such as prints, sketches or verbal descriptions and visualizes product to determine machines to be used to fabricate parts.
The incumbent will be responsible for verifying dimensions, fits, clearances and finishes, using measuring instruments, and will document these measurements throughout the machining process.
The incumbent will be responsible for assembling mold and die components.
Will also be analyzing molds and dies for wear or damage, and will apply skills and knowledge to make the proper repairs.
The incumbent may be needed to connect wiring and hydraulic lines to install electrical and hydraulic components.
The incumbent is responsible for understanding and following all EHS procedures.
Must be aware of all hazardous materials used in your area, and preventing unnecessary generation of waste materials.
Will be responsible for being aware of and to understand what to do in case of an emergency involving hazardous materials and chemicals.
This position will be responsible for reporting all accidents or injuries as well as spills or other environmental incidents, and for working in a manner that prevents EHS incidents.
The incumbent helps provide a safe work place by assisting in developing, promoting and following practices which prevent injury and meet legal safety requirements.
Follow all food safety guidelines while on the manufacturing floor.
Report any deviation from food safety protocol to the functional responsible personnel.
Qualifications:
EDUCATIONAL AND OTHER SKILL REQUIREMENTS High school diploma or equivalent GED and technical training in metal working and shop safetyKnowledge of trigonometry and geometry preferred but not requiredMust have great analytical and problem solving skills Must be able to use measuring instruments such as dial indicators, micrometers, calipers, height gage and optical comparatorMust have good organization skills and detail orientationMust have good communication and motivational skillsPHYSICAL DEMANDS Must be able to stand, bend, walk, twist, squat, kneel, push, pull, crawl, balance, job requires full range of body mechanics.
Lifting and carrying of 75lbs.
Whether use of ladders, stairs, climbing, working on platforms is required.
Ability to use and work near power tools, manufacturing equipment, utilize appropriate personal protective equipment (PPE).
Address need for fine manipulation.
Regular and reliable attendance and punctuality.
Ability to engage in shift work.
Frequent requirements of eye-hand coordination, high degree of dexterity regularly involved.
Detailed work which requires close visual attention.
About the Company:
Closure Systems International.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
